infra:printers
This is an old revision of the document!
# Printers
### 2D printer
We have a 2D printer in the space.
* Model: HP LaserJet M15w * IP: 10.10.3.20 * Location: On top of microwave * Drivers: stock Linux drivers should work * Toner: https://www.inkclub.com/no/no/Blekkpatroner-og-toner/Blekk-og-toner/Tonerkassett,-erstat/p/H44A
### 3D printer
We have a 3D printer in the space too
* Model: Prusa i3 MK3S+ * IP: 10.10.3.238 (Octoprint, not static) * Tailnet: 100.65.51.108 (Octoprint) * Location: On table between microwave and fire safe * Slicer: [Prusa-slicer](https://www.prusa3d.com/page/prusaslicer_424/) * Filament: 1.75mm PLA/PETG/FLEX/TPU++ * PEI sheets: 1x smooth, 1x textured
Dedicated page:
/srv/hackeriet-wiki/dokuwiki/data/attic/infra/printers.1738150768.txt.gz · Last modified: 2025/01/29 11:39 by kfh