We have a 2D printer in the space.

• HP LaserJet M15w
• IP: 10.10.3.20
• Location: On top of microwave
• Drivers: stock Linux drivers should work
• Toner: https://www.inkclub.com/no/no/Blekkpatroner-og-toner/Blekk-og-toner/Tonerkassett,-erstat/p/H44A

We have a 3D printer in the space too

• Model: Prusa i3 MK3S+
• IP: 10.10.3.238 (Octoprint, not static)
• Tailnet: 100.65.51.108 (Octoprint)
• Location: On table between microwave and fire safe
• Slicer: Prusa-slicer
• Filament: 1.75mm PLA/PETG/FLEX/TPU++
• PEI sheets: 1x smooth, 1x textured

Dedicated page: prusa-i3