Differences

This shows you the differences between two versions of the page.

--- infra:services:homeassistant [2024/06/01 21:19] – admin
+++ infra:services:homeassistant [2025/03/08 15:13] (current) – [Hardware] marcusramberg
@@ Line 14: / Line 14: @@
 ==== Web ====
-. Get [[infra:hackerpass | Hackerpass]]
+  - Get [[infra:hackerpass | Hackerpass]] -
-. Go to [[http://hassio.local:8123|hassio.local:8123]] (or [[http://10.10.3.115:8123|10.10.3.115:8123]] if mDNS fails) in your favorite web browser
+  - Go to [[http://hassio.local:8123|hassio.local:8123]] (or [[http://10.10.3.115:8123| 10.10.3.115:8123]] if mDNS fails) in your favorite web browser
-. Log into web using the `hassio.local` Hackerpass credentials
+  - Log into web using the `hassio.local` Hackerpass credentials
 ==== Pi ====
@@ Line 24: / Line 24: @@
 ===== Hardware =====
-* Raspberry Pi 3B+ (32 bit ARM v7)
+  * Raspberry Pi 3B+ (32 bit ARM v7)
-* RasbBee (deRFmega256-23M12)
+  * RasbBee (deRFmega256-23M12)
 ===== Debug =====
@@ Line 33: / Line 33: @@
 We've had issues with lights bouncing between modes and turning off randomly. The current theory is that new lights get stuck in a weird split-brain state when added through deCONZ. A reboot of the entire device seems to fix this.
-Update: Eirik and Deburd found that the reboot was just after OTA happens. So we tracked it to https://github.com/dresden-elektronik/deconz-ota-plugin/issues/37, where unfortunately there was no solution.
+Update: Eirik and Deburd found that the reboot was just after OTA happens. So we tracked it to https://github.com/dresden-elektronik/deconz-ota-plugin/issues/37, where unfortunately this git issue had no solution when we checked.
 However, we turned off OTAU in the DeCONZ VNC app, and the power cycles stopped.
 We also turned off OTAU in the phoscon app settings, so that may also have fixed the problem.