Differences

This shows you the differences between two versions of the page.

--- infra:printers [2024/06/22 19:47] – created kfh
+++ infra:printers [2025/04/09 06:39] (current) – marcusramberg
@@ Line 1: / Line 1: @@
-# Printers
+====== Printers ======
+===== 2D printer =====
-==== 2D printer ====
 We have a 2D printer in the space.
-* Model: HP LaserJet M15w
-* IP: 10.10.3.20
+  * HP LaserJet M15w
-* Location: On top of microwave
+  * IP: 10.10.3.20
-* Drivers: stock Linux drivers should work
+  * Location: On top of microwave
-* Toner: https://www.inkclub.com/no/no/Blekkpatroner-og-toner/Blekk-og-toner/Tonerkassett,-erstat/p/H44A
+  * Drivers: stock Linux drivers should work
+  * Toner: [[https://www.inkclub.com/no/no/Blekkpatroner-og-toner/Blekk-og-toner/Tonerkassett,-erstat/p/H44A]]
 {{:infra:printers:1000007131.jpg?400|}}
+===== 3D printer =====
+We have a 3D printer in the space too
+  * Model: Prusa i3 MK3S+
+  * IP: 10.10.3.238 (Octoprint, not static)
+  * Tailnet: 100.65.51.108 (Octoprint)
+  * Location: On table between microwave and fire safe
+  * Slicer: [[https://www.prusa3d.com/page/prusaslicer_424/|Prusa-slicer]]
+  * Filament: 1.75mm PLA/PETG/FLEX/TPU++
+  * PEI sheets: 1x smooth, 1x textured
+Dedicated page: [[infra:printers:prusa-i3]]