Hackeriet

User Tools

Site Tools

You are here: start » infra » printers
infra:printers

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
infra:printers [2025/12/17 09:46] – [3D printer] d404d_idp.hackeriet.noinfra:printers [2026/09/29 17:29] (current) – fix IP adress and locationn, add buildplate size widrone_idp.hackeriet.no
Line 22: Line 22:
  
   * Model: Prusa i3 MK3S+   * Model: Prusa i3 MK3S+
-  * IP: 10.10.3.238 (Octoprint, not static) +  * IP: 10.10.3.26 (Octoprint, not static) 
-  * Location: On shelf separating sofa and table+  * Location: In basement sauna/killroom
   * Slicer: [[https://www.prusa3d.com/page/prusaslicer_424/|Prusa-slicer]]   * Slicer: [[https://www.prusa3d.com/page/prusaslicer_424/|Prusa-slicer]]
   * Filament: 1.75mm PLA/PETG/FLEX/TPU++   * Filament: 1.75mm PLA/PETG/FLEX/TPU++
   * PEI sheets: 1x smooth, 1x textured   * PEI sheets: 1x smooth, 1x textured
 +  * Build size: 250 x 210 x 210 mm 
  
 Dedicated page: [[infra:printers:prusa-i3]] Dedicated page: [[infra:printers:prusa-i3]]
/srv/hackeriet-wiki/dokuwiki/data/pages/infra/printers.txt · Last modified: by widrone_idp.hackeriet.no