Differences

This shows you the differences between two versions of the page.

--- infra:printers:prusa-i3 [2025/01/29 11:39] – created kfh
+++ infra:printers:prusa-i3 [2025/12/10 04:15] (current) – ducky_idp.hackeriet.no
@@ Line 1: / Line 1: @@
 # Prusa i3 MK3s+
+## Debug and fixes
+### Layer issues
+Follow this list until stuff looks fine
+. [Do 1st layer calibration](https://help.prusa3d.com/article/first-layer-calibration-i3_112364)
+. Print this model: [Bed level test](https://www.printables.com/model/36706-bed-level-test)
+ - File: 3x3_cali_rl_MK3S.stl (0.2mm height, 20% infill and relevant filament)
+. [Adjust the PINDA sensor](https://help.prusa3d.com/guide/9-preflight-check_76792#76800)
+. Print test file again
+. If there's still issues, [do a manual bed level correction](https://help.prusa3d.com/article/bed-level-correction_2267)
+## octoprint setup
+https://help.prusa3d.com/article/octoprint-configuration-and-install_2182?product=mk3s-2