Hackeriet

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Making changes in the server room ======
 
This is an overview/checklist for what to do when you add hardware or make changes in the server room.

===== Add server =====

//We keep our infra inventory in [[https://ip.hackeriet.no|Netbox]], which can be accessed by everyone who's part of the Github organization.//

=== Nettlauget (member) device ===


== 1. Make sure you're in the contact list ==
  * [[https://ip.hackeriet.no/tenancy/contacts/|Link to contact list]]
  * A "Contact" holds information about how to get in touch with a specific contact person
  * Click "Add" in the top right to add a new
    * Group: ''Nettlaug members''
    * Fill out real name, e-mail and phone number
  * //We need accurate contact info for all personal devices in the server room. If someone needs to contact you (i.e in case of accidentally removed power, need to move your device or if it has an alarm), we need to be able to get in touch with you.//
  * //Important: do **NOT** add personal information about other members without their consent//

== 2. Make sure you're in the tenant list ==
  * [[https://ip.hackeriet.no/tenancy/tenants/|Link to tenants list]]
  * A "Tenant" holds information about whom something (device, IP) is assigned to
  * Click "Add" in the top right to add a new
    * Name: nick/handle (upper/lowercase as you want yourself)
    * Slug: lowercase nick/handle
    * Group: ''Nettlaug members''
  * Add yourself as contact to the tenant
    * Group: ''Nettlaug members''
    * Contact: ''<your contact>''
    * Role: ''Nettlaug member''
    * Priority: ''Primary''

== 3. Add or claim IP address(es) - public or private ==

**3.1 Public IPv4 (VLAN 130)**
    * We have a limited number of public IPv4 addresses. You will find those in [[https://ip.hackeriet.no/ipam/prefixes/7/ip-addresses/|this list]]
    * The config for this network is:
      * Network ID: ''185.35.202.192/26''
      * First IP: ''185.35.202.193''
      * Last IP: ''185.35.202.254''
      * Gateway: ''185.35.202.193''
      * Netmask: ''255.255.255.192''
    * Set "Nettlaug members" as tenant group, and your own tenant as tenant for the address
    * Fill out something descriptive (like hostname) in the ''Description'' field
    * Take note of the last octet if the IP (right-most group of numbers)

**3.2 Public IPv6 (VLAN 130) - single address**
    * Each host with a v4 address can bind a corresponding v6 address
    * You'll find the IPv6 addresses in [[https://ip.hackeriet.no/ipam/prefixes/8/ip-addresses/|this list]]
    * Pattern: ''2a02:ed06::<IPv4 octet>''
      * Example: IPv4 address is ''185.35.202.193'', that makes the IPv6 address ''2a02:ed06::193''
    * The config for this network is:
      * Network ID: ''2a02:ed06::/64''
      * First usable IP: ''20a2:ed06::1''
      * Last usable IP: ''2a02:ed06::ffff:ffff:ffff:fffe''
      * Gateway: ''20a2:ed06::1''
      * Netmask: ''ffff:ffff:ffff:ffff:0:0:0:0''
    * Set ''Nettlaug members'' as tenant group, and your own tenant as tenant for the address
    * Fill out something descriptive (like hostname) in the ''Description'' field

**3.3 Public IPv6 (VLAN 130) - multiple addresses**
  * If you need more than one IPv6 address, you can assign a range of IPv6 addresses to yourself. This will not affect any routing, but just reserve those addresses in the inventory, so that we don't get collisions.
  * Add a prefix in [[https://ip.hackeriet.no/ipam/prefixes/29/prefixes/|this list]] and use the following parameters:
    * Prefix: ''2a02:ed06::N:0/112'' (where N is the next available prefix)
      * N can anything you want between ''0001'' and ''ffff'' (not ''0000'')
    * Status: ''Container''
    * Role: ''Nettlaug-member hosts''
    * Is a pool: ''-on-''
    * Mark utilized: ''-on-''
    * Scope type: ''DCIM > Site''
    * Site: ''Hausmania''
    * VLAN: ''NETT-SRV (130)''
    * Tenant group: ''Nettlaug members''
    * Tenant: ''<your tenant>''

== 4. Make sure your device's model is in the list of [[https://ip.hackeriet.no/dcim/device-types/|Device types]] ==
  * Make sure to add "**Interface**" components as well (use ''eth0'', ''eth1'', ''eth2'' etc. if you don't have their numbering) for the device type. This will allow you to document where it's connected.
  * Interfaces etc. are only populated on a Device from the Device Type //when it is initially created//. When changing the Device Type after Device creation, you need to either manually move over changes or recreate the Device.

== 5. Create the device from the [[https://ip.hackeriet.no/dcim/devices/|Device list]] ==
  * Device role: ''Member device''
  * Device type: ''<your device type>''
  * Site: ''Hausmania''
  * Location: ''Haus server room''
  * Tenant group: ''Nettlaug members''
  * Tenant: ''<your tenant>''


== 6. Go to the device and add yourself as contact ==