Hackeriet

User Tools

Site Tools

You are here: start » infra » server-roomchanges
infra:server-roomchanges

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
infra:server-roomchanges [2025/02/16 16:52] – kfhinfra:server-roomchanges [2025/02/28 20:30] (current) – Some styling kfh
Line 10: Line 10:
  
  
-1. Make sure you're in the contact list+== 1. Make sure you're in the contact list ==
   * [[https://ip.hackeriet.no/tenancy/contacts/|Link to contact list]]   * [[https://ip.hackeriet.no/tenancy/contacts/|Link to contact list]]
   * A "Contact" holds information about how to get in touch with a specific contact person   * A "Contact" holds information about how to get in touch with a specific contact person
Line 19: Line 19:
   * //Important: do **NOT** add personal information about other members without their consent//   * //Important: do **NOT** add personal information about other members without their consent//
  
-2. Make sure you're in the tenant list+== 2. Make sure you're in the tenant list ==
   * [[https://ip.hackeriet.no/tenancy/tenants/|Link to tenants list]]   * [[https://ip.hackeriet.no/tenancy/tenants/|Link to tenants list]]
   * A "Tenant" holds information about whom something (device, IP) is assigned to   * A "Tenant" holds information about whom something (device, IP) is assigned to
Line 32: Line 32:
     * Priority: ''Primary''     * Priority: ''Primary''
  
-3. Add or claim IP address(es) - public or private+== 3. Add or claim IP address(es) - public or private ==
  
-3.1 Public IPv4 (VLAN 130)+**3.1 Public IPv4 (VLAN 130)**
     * We have a limited number of public IPv4 addresses. You will find those in [[https://ip.hackeriet.no/ipam/prefixes/7/ip-addresses/|this list]]     * We have a limited number of public IPv4 addresses. You will find those in [[https://ip.hackeriet.no/ipam/prefixes/7/ip-addresses/|this list]]
     * The config for this network is:     * The config for this network is:
Line 46: Line 46:
     * Take note of the last octet if the IP (right-most group of numbers)     * Take note of the last octet if the IP (right-most group of numbers)
  
-3.2 Public IPv6 (VLAN 130) - single address+**3.2 Public IPv6 (VLAN 130) - single address**
     * Each host with a v4 address can bind a corresponding v6 address     * Each host with a v4 address can bind a corresponding v6 address
     * You'll find the IPv6 addresses in [[https://ip.hackeriet.no/ipam/prefixes/8/ip-addresses/|this list]]     * You'll find the IPv6 addresses in [[https://ip.hackeriet.no/ipam/prefixes/8/ip-addresses/|this list]]
Line 60: Line 60:
     * Fill out something descriptive (like hostname) in the ''Description'' field     * Fill out something descriptive (like hostname) in the ''Description'' field
  
-3.3 Public IPv6 (VLAN 130) - multiple addresses+**3.3 Public IPv6 (VLAN 130) - multiple addresses**
   * If you need more than one IPv6 address, you can assign a range of IPv6 addresses to yourself. This will not affect any routing, but just reserve those addresses in the inventory, so that we don't get collisions.   * If you need more than one IPv6 address, you can assign a range of IPv6 addresses to yourself. This will not affect any routing, but just reserve those addresses in the inventory, so that we don't get collisions.
-  * Add an IP range in [[https://ip.hackeriet.no/ipam/ip-ranges/|this list]] and use the network config in 3.2 to configure the additional addresses +  * Add a prefix in [[https://ip.hackeriet.no/ipam/prefixes/29/prefixes/|this list]] and use the following parameters: 
-    * X and Y can anything you want between ''0000'' and ''ffff'' +    * Prefix: ''2a02:ed06::N:0/112'' (where N is the next available prefix) 
-    * Z can anything you want between ''0001'' and ''ffff'' (not ''0000'') +      * N can anything you want between ''0001'' and ''ffff'' (not ''0000'') 
-    * //BE CONSIDERATE// and don't claim too many addresses +    * Status: ''Container'' 
-    * Start: ''20a2:ed06::X:Y:Z:0/64'' +    * Role: ''Nettlaug-member hosts'' 
-    * End: ''20a2:ed06::X:Y:Z:ffff/64'' +    * Is a pool: ''-on-'' 
-    * Description: short description of what you'll use the addresses for+    * Mark utilized: ''-on-'' 
 +    * Scope type: ''DCIM > Site'' 
 +    * Site: ''Hausmania'' 
 +    * VLAN: ''NETT-SRV (130)''
     * Tenant group: ''Nettlaug members''     * Tenant group: ''Nettlaug members''
     * Tenant: ''<your tenant>''     * Tenant: ''<your tenant>''
  
-4. Make sure your device's model is in the list of [[https://ip.hackeriet.no/dcim/device-types/|Device types]] +== 4. Make sure your device's model is in the list of [[https://ip.hackeriet.no/dcim/device-types/|Device types]] == 
-5. Create the device from the [[https://ip.hackeriet.no/dcim/devices/|Device list]]+  * Make sure to add "**Interface**" components as well (use ''eth0'', ''eth1'', ''eth2'' etc. if you don't have their numbering) for the device type. This will allow you to document where it's connected. 
 +  * Interfaces etc. are only populated on a Device from the Device Type //when it is initially created//. When changing the Device Type after Device creation, you need to either manually move over changes or recreate the Device. 
 + 
 +== 5. Create the device from the [[https://ip.hackeriet.no/dcim/devices/|Device list]] ==
   * Device role: ''Member device''   * Device role: ''Member device''
   * Device type: ''<your device type>''   * Device type: ''<your device type>''
Line 80: Line 86:
   * Tenant group: ''Nettlaug members''   * Tenant group: ''Nettlaug members''
   * Tenant: ''<your tenant>''   * Tenant: ''<your tenant>''
-6. Go to the device and add yourself as contact+ 
 + 
 +== 6. Go to the device and add yourself as contact == 
 + 
/srv/hackeriet-wiki/dokuwiki/data/attic/infra/server-roomchanges.1739724744.txt.gz · Last modified: 2025/02/16 16:52 by kfh