Differences

This shows you the differences between two versions of the page.

--- infra:audio [2026/08/07 22:16] – [Network switches] d404d_idp.hackeriet.no
+++ infra:audio [2026/08/07 22:35] (current) – [Mixer] d404d_idp.hackeriet.no
@@ Line 18: / Line 18: @@
   * The master fader will limit all your other channels; set the master to the max you want for this listening session, then gradually use the channel fader to introduce your audio onto
   * The mute buttons cuts a single channel off; DO use mute buttons, and DO check them (pressed == muted, depressed == unmuted)
-  * The solo buttons cuts all OTHER channels off; DO NOT use mute buttons (pressed == solo, depressed == normal)
+  * The solo buttons cuts all OTHER channels off; DO NOT use solo buttons (pressed == solo, depressed == normal)
   * Does the top right of the mixer blink red? Solo is on somewhere; turn all channels down, find the active solo buttons, and unpush them.
@@ Line 57: / Line 57: @@
   * Ch. 15-16: Chromecast
+{{:infra:img_4039.jpeg?direct&400|}}
+{{:infra:img_4036.jpeg?direct&200|}}{{:infra:img_4037.jpeg?direct&200|}}
 ==== Dante ====
 We have a borrowed set of professional audio Dante receivers that are hooked up in the audio rack. These are owned by skandix from TG:HACK and labelled as such.
-These are occasionally used during parties, or when we're borrowing the Matelight for use in e.g. Flerbruksen.
+These are occasionally used during parties, or when we're lending out the Matelight for use in e.g. Flerbruksen.
 Hackeriet does not own any source devices.
@@ Line 96: / Line 99: @@
 ===== Network switches =====
 There are two switches in the rack, for powering AV-related escapades:
-  * 1x 48 port 1 Gbps switch (lydrack-sw2), for high-throughput applications (video, etc.) with uplink to hackeriet-sw
+  * 1x 48 port 1 Gbps switch ([[https://ip.hackeriet.no/dcim/devices/76/|lydrack-sw2]]), for high-throughput applications (video, etc.) with uplink to hackeriet-sw
   * 1x 24 port 100 Mbps switch ([[https://ip.hackeriet.no/dcim/devices/74/|lydrack-sw]]), for low-throughput PoE applications (audio, DMX, etc.) with uplink to lydrack-sw2