Differences

This shows you the differences between two versions of the page.

--- howto:member_access_card [2026/09/05 15:19] – Create member access-card howto atluxity_idp.hackeriet.no
+++ howto:member_access_card [2026/09/05 15:28] (current) – Clarify member access-card prerequisites atluxity_idp.hackeriet.no
@@ Line 8: / Line 8: @@
   * Hula admin access
+  * the member already exists in Hula
+  * physical access to the safe and the door reader
   * an RFID card from the safe
-  * access to read the door daemon logs on ''bac-door1.hackeriet.no''
+  * a way to read the card number, either:
+    * a phone with an RFID/NFC reader app
+    * SSH access to ''bac-door1.hackeriet.no'' with permission to run ''sudo journalctl -u doord -f''
 ===== Register the card =====
@@ Line 16: / Line 20: @@
   - Get an RFID card from the safe.
   - Read the card number. A phone with an RFID/NFC reader app can read at least some of the cards directly. Hula expects the value as lowercase hexadecimal with a ''0x'' prefix and no separators. For example, if the app shows ''F6:A8:15:39'', enter ''0xf6a81539'' in Hula.
-  - Watch the door daemon logs while presenting the card to the door reader:
+  - The card number can also be read from the door daemon log while presenting the card to the door reader:
 <code>
@@ Line 22: / Line 26: @@
 </code>
-  - The door system logs continuously while it looks for card information.
   - Present the unregistered card to the door lock.
   - Look for the ''unregistered card'' log line and copy the card number from that line.
-  - Put that card number into the Hula Django field named ''RFID access card number. (new):''.
+  - Put the card number into the Hula Django field named ''RFID access card number. (new):''.
   - Save the user/member record.